Heat Exchanger is a device built for efficient heat transfer from one fluid to another, whether the fluids are separated by a solid wall so that they never mix or the fluids are directly contacted.
Fans are used to generate the air to transfer the heat, hence fans are the essential part of the heat exchangers. It is very important to select a suitable fan according to the application of the heat exchanger and PARAG has developed the range of fans particularly for heat exchanger application.
Available Sizes : 2 Feet to 36 Feet ( 600 mm to 10974 mm)
Number of Blades : Up to 12
Static Pressure : Up to 2 Inches of WG (50 mm)
Air Flow : Up to 30,00,000 CFM (1420 m^3 / sec)
Fan RPM : Up to 1440
Operating Temperature Range : - 40ºC to 120ºC
Features & Benefits
FRP FAN:
High efficiency of operation.
More air with less power.
Reduced power for same air.
Optimal pperational cost.
Economical initial cost small fans up to 6 Feet (1800 mm) diameter are dynamically balanced as per ISO–1940 Grade 6.3
Fans available with or without seal disk to suit Induced Draft or Forced Draft applications.
Unless otherwise stated, this website is for information only. PARAG has used all reasonable care and skill in compiling the content of this
website but makes no warranty as to the accuracy of any information on this website and cannot accept liability for any errors or omissions.
